Basic concepts for the Aurora Imaging Library 3D Metrology module
The basic concepts and vocabulary conventions for the Aurora Imaging Library 3D Metrology module are:
- Depth. A measurement extending from the surface of the object to the XY-plane (that is, the Z=0 plane), in world units.
- Depth map. An image where the gray value of a pixel represents its depth in the world.
- Fully corrected depth map. A depth map that accurately represents the height and shape of portrayed objects; its pixels represent a constant size in X and Y in the world. Note that, when dealing with depth maps, the size of the pixels is not necessarily square.
- Initial fit estimate. Specifies an initial estimate for the position of a 3D geometry, relative to the point cloud or depth map, at the start of the fitting operation.
- Mesh. A triangulated surface generated for a point cloud.
- Pose. The established position and orientation of an object in space.
- Reference plane. A plane with a known height and orientation, and used as a measure against which to compute distances, angles, volumes, or other calculations.
- Root-mean-square (RMS) error. In the Aurora Imaging Library 3D Metrology module, the RMS error is a measure of the overall distance between two Aurora Imaging Library objects. A lower error indicates a smaller overall distance between the two Aurora Imaging Library objects, and vice versa. [Image: 3dreg_RootMeanSquareError_eq.png]
- XY-plane. The plane defined by the equation Z=0 in a world coordinate system.
- XZ-plane. The plane defined by the equation Y=0 in a world coordinate system.